Schneider Electric U/UTP, CAT6 Cable - (VDICD116218)

Copper LAN cable, Actassi, U/UTP, 4P, Cat6, Euroclass D, 250MHz, LSZH, 500m

Specifications

• range: Actassi
  
• product or component type: Copper cable
• cable packaging: Drum of 500 m
• color tint: Green
• cable shielding type: U/UTP

• type of cable: 4 pair cables
• communication network category: 6
• remote powering: 
• PoE 15W (Power over Ethernet)
• PoE+ 30W (Power over Ethernet Plus)
• 4PPoE 100W (Power over Ethernet)
• communication network type: 1000BASE-T
• minimum return loss:
• Guaranteed: 20.1 dB at 100 MHz typical: 23 dB
• Guaranteed: 17.3 dB at 250 MHz typical: 19 dB
• attenuation:
• Guaranteed: 19.9 dB Typical: 19.1 dB @ 100 MHz
• Guaranteed: 33 dB Typical: 32 dB @ 250 MHz
• power sum near-end crosstalk [PSNEXT]:
• Guaranteed: 42.3 dB at 100 MHz
• Guaranteed: 36.3 dB at 250 MHz
• attenuation to Crosstalk Ratio Far-end [ACRF]
• Guaranteed: 28 dB at 100 MHz
• Guaranteed: 20 dB at 250 MHz
• power sum attenuation crosstalk ratio far-end [PSACRF]
• 25 dB at 100 MHz
• 17 dB at 250 MHz
• near end crosstalk [NEXT]
• Guaranteed: 45.3 dB at 100 MHz
• Guaranteed: 39.3 dB at 250 MHz
• input impedance: 100 Ohm
• transverse conversion loss: >= 40 - 10 x log(f) dB from 1…250 MHz conforming to IEC 61156-5, ed. 2.1
• segregation class: Class b conforming to EN 50174-2
• pulling force: 140 N
• bending radius
• Minimum bending radius during installation: 8 x overall diameter
• Minimum bending radius after installation: 4 x overall diameter
• material
• Solid bare copper: conductor
• PE (polyethylene): wire insulation
• PE (polyethylene): sheath
• euroclass level: Dca s2 d2 a2
• nominal velocity propagation: 68 %
• AWG gauge: AWG 23
• calorific value: 599 MJ/km
• cable outer diameter: 5.9 mm
• cable weight: 40.9 kg / 1 km

• ambient air temperature for installation: 0…50 °C
• ambient air temperature for storage: -20…60 °C
• ambient air temperature for operation: -20…60 °C
• directives
• 2006/95/EC - low voltage directive
• 305/2011/EU - construction product regulation
• flame retardance: LSZH
• standards
• ISO/IEC 11801-ed. 3 performance
• EN 50173-1 performance
• EN 50174-1 performance
• ANSI/TIA/EIA-568-C.2 performance
• IEC 61156-5-ed. 2.1 performance
• EN 50288-6-1 performance
• ISO/IEC 14763-2 installation standards
• EN 50174-2 installation standards
• IEC 60332-1 flame propagation characteristics
• IEC 60754-1
• IEC 60754-2 acidity of combustion gases
• IEC 61034 smoke generation